Built-in GPS antenna
Built-in 50 channel GPS receiver (with WAAS/EGNOS) with its own internal GPS antenna eliminates the need to install an external GPS antenna in many situations.
The XB-6000 is the only AIS transponder that can be used as a source of GPS data on a NMEA 2000 network and is also the only AIS transponder with a fast 5Hz GPS navigation and update rate. This results in higher resolution and smoother tracks on your plotter or MFD, even during high speed maneuvers.
High speed 5Hz GPS navigation rate
The only AIS transponder with high speed GPS navigation resulting in smoother and more accurate tracking on attached plotters, MFD's and computer software.
Translates and routes your NMEA instrument data over USB
Translates NMEA 2000 instrument data (heading, wind, depth, speed, log, temperature) and routes to USB or NMEA 0183 for supporting plotters without NMEA 2000. All this data is combined with GPS and AIS data and sent simultaneously to computers via USB or plotters using NMEA 0183. Display and use this data in your Windows or Mac navigation software.
Fully certified NMEA 2000
Ensures easy integration with any other NMEA 2000 equipment. You can confidently use the XB-6000 with any chart plotter or multi-function display by all the major manufacturers.
High performance AIS Transponder
The XB-6000 is an AIS transponder with two channel parallel receiver and transmitter. This highly sensitive transponder means greater range and increased safety. Connects to 12 or 24 volt power supply.
Very Low Power Consumption
Designed for minimal power consumption the XB-6000 is extremely well suited for energy conscious vessels.
Fully Water Proof
Unlike most other AIS transponders, the XB-6000 is water proof so you don't have to worry about it. It's a measure of how robust and reliable it is. It is even rated IPx7 which means it is totally submersible to 1m for up to 30 mins!
USB Connection (waterproof and locking with optional cable)
The USB connection can be used to connect the XB-6000 to on-board computers. The XB-6000 provides a GPS and AIS data feed directly to computer-based navigation software. It translates selected NMEA 2000 instrument data and sends that to your computer too. An optional 5m (16') waterproof cable features a locking ring so it can't vibrate out of the back of the XB-6000.
Silent Mode Control via PC, Mac or an external switch
Allows XB-6000 to be put in Silent Mode. When in this mode, the AIS receivers and GPS continue to operate normally. The only change is transmissions are inhibited. Perfect for those times when you want privacy. Silent mode can be controlled by an external switch (not included) or via your PC or Mac.
Self Diagnosis Status Lights
Multi-color LED keeps you informed of operational status providing self diagnosis that shows warnings if AIS, GPS, or antenna are not functioning.