 The AIS-2-NMEA Receiver is a Dual Channel Parallel AIS Receiver. AIS Targets are displayed on a Chart plotter giving the user a clear picture of other vessels within VHF range. The NMEA 0183 interface allow easy and compatible connection to NMEA standard chart plotters from Raymarine, Garmin, Northstar, Lowrance, Simrad and others.
KEY FEATURES
Two AIS receivers monitor both AIS channels simultaneously
The AIS-2-NMEA uses two receivers operating in parallel providing true dual-channel simultaneous reception of both Class A and Class B transponder signals. This ensures that all AIS transponder broadcasts are captured in real time.
Reception from both Class A and Class B transponders, plus Aids to Navigation
True NMEA output
Designed specifically for use with NMEA chart plotters using a standard RS422 interface.
Support for 12 and 24 volt DCpower
The AIS-2-NMEA can be powered by 12 or 24 volt DC allowing for installation in virtually any vessel’s power system.
Easy installation
Connect a VHF antenna to the rear socket, connect the unit to your boats battery supply, connect the NMEA output to the NMEA input of your Chart Plotter and the unit is ready to receive AIS transmissions from vessels within VHF range.
Use with dedicated antenna or splitter
Can be used with a dedicated VHF marine radio antenna or click here for information on using the ASR 100 Antenna Splitter.
Power & channel LEDs
Compact design
4.75 in. x 3.5 in. x 1.5 in.
SPECIFICATIONS
| Dimensions Overall |
120 x 86 x 37 mm |
| Power |
9-30 VDC |
| Current |
110mA @ 12 VDC |
| Output |
NMEA 0183 |
| Message type |
VDM |
| Baud Rate |
38400 (4800 via jumper) |
| Receiver |
Dual Channel Parallel |
| Frequency |
161.975 and 162.025MHz |
| Sensitivity |
-112dBm |
| Connections |
Power / data 36 inch cable
(power 2 wires, data 2 wires) |
| Antenna |
BNC Socket 50 Ohm |
Click here to download a product brochure ...
Click here to download the product manual ...
|
Shopping Cart - 0 item(s)
